Guangzhou Junsheng Light Industrial Machinery Co.,Ltd
Products Categories
Contact Us
ADD: A201 JiafuBuiding, Culture Square, Dashi Town, Panyu District, Guangzhou, China
MOBILE: +86-13922725933
TEL: +86-020-86665505
FAX: +86-020-86665505
E_mail: machinery@imonrushd.com
1.555 Liter Bottle Water Filling Machine
1.555 Liter Bottle Water Filling Machine1.555 Liter Bottle Water Filling Machine of the production range is 6,000-18,000 bottles per hour, it suitable for the production of bottled drinking water like purified water, mineral water, mountain spring water, etc, and the applicable containers is PET bottles of various capacities and shapes.

Products Details


1. Application of the 1.555 Liter Bottle Water Filling Machine




2. Features of the 1.555 Liter Bottle Water Filling Machine

Bottle feeding mechanism of the bottle water filling machine

(1) air inlet way and bottle feeding wheel directly connected to the bottle.

(2) there is a pneumatic flask device.

Rinsing machine part of the bottle water filling machine

(1) all the revolving plates are welded with stainless steel.

(2) large plane belt bearing, running smoothly and reliably.

(3) flip bottle clip, bottle clip jammed the bottleneck area, avoid possible pollution to the screw thread part of bottle mouth.

(4) a dedicated high efficiency spray nozzle. The flushing water can be ejected at a set angle. It can be flushed to any part of the inner wall of the bottle, flushing thoroughly and saving water for flushing.

(5) the flask nozzle lifting mechanism, the nozzle is inserted into the bottle to wash the bottle, so that the washing effect reaches the standard. At the same time, the maximum amount of water can be reduced to meet the production demand of the large bottle.

(6) the power of flushing is transmitted by gears inside the rack.

Transition wheel of the bottle water filling machine 

(1) the use of high quality stainless steel wheel.

(2) a bottle bottle protection device is set up.

Filling part of the bottle water filling machine

(1) gravity filling, large plane belt bearing, running smoothly and reliably.

(2) the rotating disc is made of stainless steel.

(3) the design of filling valve structure is reasonable and the filling quantity is accurate.

(4) the liquid level of the liquid cylinder is controlled by a floating ball.

(5) the filling power is transmitted by the gear transmission system inside the rack.

Capping part of the bottle water filling machine

(1) there is a check switch of the screw cap, which is connected with the lid guideway and the dialing disc to control the discharge of the cap cylinder, so as to ensure that the lid is stopped and the loss of the cover is reduced.

(2) the falling cover guide is equipped with a counter cover and a back cover removal mechanism, and a set of photoelectric switches, which automatically stops the operation of the machine when the cover guide is not covered. It can effectively avoid the appearance of the bottle without the lid.

(3) high efficiency centrifugal capping method with little wear.

(4) the lid cap is equipped with a lack of lid detection mechanism for controlling the lifting and stopping of the bottle cap hoist.



Bottle conveyor chain of the bottle water filling machine

(1) the variable frequency speed governing motor is kept in synchronism with the three in one filling machine, which effectively prevents the bottle from overturning.

(2) a photoelectric switch is installed on the bottle conveying chain. When the bottle is blocked, the three in one filling machine can be controlled to slow down and shut down.

(3) bottle protection device

(4) the conveying mode of the bottom of the bottle. The bottom plate is a spiral curve.


Machine structures

(1) the frame is welded with high-quality carbon steel, and the surface is rust treated and sprayed. The surface is covered with stainless steel plates.

(2) the three in one transmission system is located on the lower surface of the frame, driven by a main motor and driven by gears.

(3) the transmission gear adopts the cross arrangement of steel gear and nylon gear.

Controlling system

(1) PLC automatically completes the whole process control of three in one filling machine from bottle to bottle.

(2) touch screen operation, production speed, class output count, fault category, fault occurrence point are all displayed on the screen, and can automatically statistics fault occurrence time, fault category and other information.


3. Products parameters of 1.555 Liter Bottle Water Filling Machine


Model

Rinser

Filler

Capper

Capacity (500ml)

Bottle Size

Dimension
(mm)

Weight
(Kg)

(mm)

(mm)

(ml)

JLG06B

16

16

6

8000

Φ60-Φ130

180-315

350-2000

2560×1860×2700

4000

JLG08A

24

24

8

12000

Φ60-Φ99

180-315

350-1500

2560×1860×2700

5000

JLG08

32

32

8

15000

Φ60-Φ103

180-315

350-2000

3060×2260×2700

6800

JLG12A

40

40

12

20000

Φ60-Φ105

180-315

350-2000

3770×2820×2700

8000

JLG12B

48

48

12

24000

Φ60-Φ86

180-315

350-1000

3770×2820×2700

8300

JLG15A

60

50

15

24000

Φ60-Φ107

180-315

350-2000

5150×4050×2700

11000

JLG15

72

60

15

30000

Φ60-Φ108

180-315

350-2000

5750×4910×2700

12000

JLG18A

72

72

18

36000

Φ60-Φ108

180-315

350-2000

6200×5000×2700

13500

JLG18B

80

80

18

40000-43000

Φ60-Φ109

180-315

350-2000

7000×5000×2700

16000


4. Certificates, patents and partners



5. Filling bottles sample of 1.555 Liter Bottle Water Filling Machine

47(001).jpg


6. Our workshop for 1.555 Liter Bottle Water Filling Machine


7.jpg


7. Our exhibition and foreign customers 

14.jpg


8. Machine package and delivery

16.jpg

18.jpg





Related Products
Hot Tags: 1.555 liter bottle water filling machine, suppliers, manufacturers, factory, price, for sale