1. Application of the Automatic Water Bottle Filler
3-5 Gallon Barrel Water Filling Machine is fully proves the effective application of the barrel in the production of barreled water. It not only reduces the cost of product cost, but also reduces the cost of manpower and material resources consumed in the process of inspection, cleaning and disinfection, and reduces the corrosion and damage to the barrel in the process of disinfection and cleaning, thus prolonging the barrel of the barrel. For a barreled water manufacturer, in addition to the initial input of the barrel, the input of the following new bucket is the maximum production cost for a barreled water manufacturer. The maximum degree avoids the disinfection and cleaning of the recovery barrel due to the two pollution (various kinds of fungi, algae, stains, impurities and the inner wall contact with the bucket). No complete risk. At the same time, it also saves a lot of high quality water resources, reduces the environmental pollution caused by soaking, cleaning, disinfection and other liquid emissions, not only conforms to the current national policy of environmental protection, energy saving and emission reduction, but also greatly prolongs the shelf life of water and ensures the freshness of water.
2. Features of the 3-5 Gallon Barrel Water Filling Machine
Automatic cap pullout machine of the 3-5 Gallon Barrel Water Filling Machine
The fully automatic capping machine is made up of four actions.
A) the conical block connected by the piston of the square cylinder built inside the head to drive the lid of the four claw buckles to pull the bucket to complete the cover movement.
B) the piston of the pulling cap cylinder is mounted on the top of the head to drive the whole head up, and the bucket to be pulled up will also go up, but as the shoulder of the barrel is blocked by the fixed baffle, the lid is pulled out from the bucket in the process of drawing the head. This is the action of drawing the lid.
C) after the removal of the lid, the piston with a built-in square cylinder immediately descends, and the column connected with it pushes four claw open cover to fall off under the action of self weight and complete the unloading.
D) when the lid is off, the gas outlet opens immediately, and the compressed air immediately blow the cover to the flow cap mouth and flow to the cover box, and the entire pulling operation is completed. (the four movements are less than 4S). The rack is made of SUS304 stainless steel.
Straight line brushing system of the 3-5 Gallon Barrel Water Filling Machine
The outside brushing process is realized by a bucket scrubbing machine.
A) in a relatively closed environment (avoiding washing liquid), the power head revolved through the gear mechanism (bottle, bottle neck, bottle bottom), and the high pressure pump sucked the water in the water tank to continuously spray them, so that the shoulder of the barrel could be reached through the continuous brushing of the brush and water. The barrel body and the bottom of the bucket are cleaned in all directions to ensure that there is no dead angle in the brush.
B) the empty bucket is imported from the conveyor belt to the external scrubbing bucket machine. The outer brush of the outer brush is made up of three parts. The first part is made up of a specially designed brush and brushing the bucket mouth, cleaning the dirt, dirt and dirt from the bucket, and the second part is made up of a special special brush shaped by the barrel, and the barrel is brushing with a strong brushing, but the dirt is removed but again No damage to the barrel and print, the third part is made up of a special brush at the bottom of the bucket. Not only can the bottom bucket be washed, but also the bottom bucket can be washed. In the process of cleaning, the cleaning agent is used to make the detergent more thorough. At the exit of the bucket, the clean water spray system will wash the detergent.
C) the whole machine is equipped with overload skidding device to prevent the bottle.
D) the whole machine is composed of a tightly coordinated whole by PLC control and inner washing filling machine.
E) of course, if it is not connected, it can also work alone.
Automatic bucket loading system of the 3-5 Gallon Barrel Water Filling Machine
The automatic barrel is realized by a simple manipulator (cylinder drive): when the electric eye senses the bucket sent by the scouring machine outside the bucket, the manipulator begins to work, automatically transfers the bucket from the chain to the bucket machine, and then turns the cylinder to start working and moves the empty bucket to the inner bucket machine. The system is equipped with a bucket barrel device, thereby avoiding the insertion of the bucket and achieving the upper barrel rate of one hundred percent.
3. Products parameters of the 3-5 Gallon Barrel Water Filling Machine
Bottled water filling machine（applied to fill pure water/mineral water/spring water）
T type Structure
4. Certificates, patents and customers
5. Filling bottles sample of the 3-5 Gallon Barrel Water Filling Machine
6. Our workshop for the 3-5 Gallon Barrel Water Filling Machine
7. Our exhibition and foreign customers
8. Machine package and delivery