Guangzhou Junsheng Light Industrial Machinery Co.,Ltd
Products Categories
Contact Us
ADD: A201 JiafuBuiding, Culture Square, Dashi Town, Panyu District, Guangzhou, China
MOBILE: +86-13922725933
TEL: +86-020-86665505
FAX: +86-020-86665505
E_mail: machinery@imonrushd.com
5 Gallon Water Bottle Filling Machine
5 Gallon Water Bottle Filling Machine5 gallon water bottle filling machine is adopts a few new technologies such as motor drive, full closed pressure filling, liquid surface testing and so on. All actions, testing and control are controlled by PLC, making the machine more hygienic, safe and stable, greatly reducing the occurrence of fault and making the application wider.

Products Details


1. Application of the 5 Gallon Water Bottle Filling Machine


1.jpg


5 gallon water bottle filling machine sets automatically draws cover, bottle washing, automatic bottle, inner flushing system, filling, wind cover, cover cover, cover, heat shrinkable film, straight bucket machine, stacker and finished product. The whole production process has closed operation, plus ultraviolet sterilization and odor oxygen disinfection, ensuring the whole washing bottle filling. The course fully meets the relevant standards and regulations of the National Health Department, effectively preventing the two possible pollution of drinking water during the filling process and making aseptic production.


2. Features of the 5 Gallon Water Bottle Filling Machine


3(001).jpg


1. the action time of the cap is short and accurate (completed by the special cylinder), the adjustment is simple, the claw piece is made by the shape of imitation cover, and it can guarantee not to hurt the bucket and cover, and the structure is simple and easy to maintain.

2. revolving external brush bucket machine adopts all round brushing and spray washing technology, with central brush, edge brush and bottom brush, all of which are rotated by gear drive, and can fully scrub the bucket neck, bucket shoulder, bucket body and bucket bottom, without wear and dead angle, it can completely replace the external washing process in the inner washing. The reliability and stability of the machine is very high, and the output can be easily adjusted. Two workplaces are washed with alkaline liquid and finished water.

3. the interface between the outer barrel washing machine and the washing machine adopts the manipulator to carry on the automatic barrel, the energy consumption is low, the positioning is accurate, and the bucket bottom has no relative friction.

4. the inner washing adopts the lifting high pressure flushing process to ensure that there is no dead angle.

5. the fully automatic filling machine of 5 gallon bottle filling machine adopts the plug-in full closed filling process to ensure that the liquid level control is accurate and reliable, so that aseptic filling is realized.

6. the lower cover adopts the centrifugal cover mechanism, the Italy cap lid hanging technology, the bucket height error is 2 centimeters plus or minus.

Stainless steel crawler cap.

7. the intelligent steam heat shrinkable membrane machine water tank is connected with the water pipe, the float type electronic water level controller presupposes the water level and the electric heater is heated to the water in the kettle. When the preset value is reached (4 to 7 atmospheres can be adjusted), the pressure control detection circuit will give off the electrical signal, and the main power control circuit will turn off the heating power immediately. This process is about 10-20 minutes. When the steam temperature is 140-170 degrees, the machine can start working at this time. Fully automatic program control, fully automatic, high pressure storage, heat flow more concentrated and efficient, completely avoiding the shrinkage phenomenon.

8. straight-line bucket machine, the realization of soft, straight line walking, the Japanese original imported spring chain safety and health, can single machine use or online layout to achieve pipeline operation.

9. 5 gallon bottle filling machine automatic palletizing machine, frequency conversion control, palletizing layer: three storeys (heightened palletizing number, tailor size can be customized).

The power head of the 10. transmission system adopts the imported deceleration motor and the high quality 304 stainless steel conveyer belt, thus ensuring the high stability and reliability of the conveying system.

11. all fuselage of this line is mainly made of high quality SUS304 stainless steel Seiko.

12. the whole production line of 5 gallon bottle filling machine adopts the Japanese "OMRON" (PLC) industrial microcomputer control, no pole frequency conversion speed regulation, simple operation, easy to use, to ensure that the functional parts of a tightly coordinated whole, so that long and continuous operation can be achieved.


3. Products parameters of the 5 Gallon Water Bottle Filling Machine


Bottled water filling machineapplied to fill pure water/mineral water/spring water

Structure

Model

Filling Heads

Capacity

Bucket size

Pneumatic pressure

(mm)Dimension

T type Structure

CSG02T

2

300

F270×490(mm)

0.5Mpa-0.7Mpa

3800/1648/2180

CSG03T

3

450

F270×490(mm)

0.5Mpa-0.7Mpa

3930/2300/2260

Splitting Structure

CSG03F

3

450

F270×490(mm)

0.5Mpa-0.7Mpa

4760/4500/2140

CSG04F

4

600

F270×490(mm)

0.5Mpa-0.7Mpa

4760/5100/2140

CSG06F

6

900

F270×490(mm)

0.5Mpa-0.7Mpa

5060/6600/2140

Rotary Structure

CSGZ10

10

1200

F270×490(mm)

0.5Mpa-0.7Mpa

2230/2300/2700

CSGZ12

12

1500

F270×490(mm)

0.5Mpa-0.7Mpa

2530/2300/2700

CSGZ16

16

2000

F270×490(mm)

0.5Mpa-0.7Mpa

3030/2800/2700

CSGZ20

20

3000

F270×490(mm)

0.5Mpa-0.7Mpa

3540/3390/2700


4. Certificates, patents and customers



5. Filling bottles sample of the 5 Gallon Water Bottle Filling Machine


12(001).jpg


6. Our workshop for the 5 Gallon Water Bottle Filling Machine


7.jpg


7. Our exhibition and foreign customers 

14.jpg


8. Machine package and delivery

16.jpg

18.jpg





Related Products
Hot Tags: 5 gallon water bottle filling machine, suppliers, manufacturers, factory, price, for sale